Fuel Consumption - Co 2 - Emissions; Trailer Hitch; General Information - Opel INSIGNIA Owner's Manual

Hide thumbs Also See for INSIGNIA:
Table of Contents

Advertisement

Fuel consumption - CO
Emissions
The fuel consumption (combined) of
the model Opel Insignia is within a
range of 10.9 to 3.8 l/100 km.
Depending on country, the fuel
consumption is displayed in km/l. In
this case the fuel consumption
(combined) of the model Opel
Insignia is within a range of 9.2 to
26.3 km/l.
The CO
emission (combined) is
2
within a range of 252 to 99 g/km.
For the values specific for your
vehicle, refer to the EEC Certificate of
Conformity provided with your vehicle
or other national registration
documents.

General information

The official fuel consumption and
specific CO
emission figures quoted
2
relate to the EU base model with
standard equipment.
Fuel consumption data and CO
emission data are determined
according to regulation R (EC) No.
-
715/2007 (in the version respectively
2
applicable), taking into consideration
the vehicle weight in running order, as
specified by the regulation.
The figures are provided only for the
purpose of comparison between
different vehicle variants and must
not be taken as a guarantee for the
actual fuel consumption of a
particular vehicle. Additional
equipment may result in slightly
higher results than the stated
consumption and CO
Furthermore, fuel consumption is
dependent on personal driving style
as well as road and traffic conditions.
2
Driving and operating

Trailer hitch

General information
The factory-fitted towing equipment is
folded up under the rear bumper
fascia.
Entrust retrofitting of towing
equipment to a workshop. It may be
necessary to make changes that
affect the cooling system, heat
shields or other equipment. Only use
towing equipment that has been
figures.
2
approved for your vehicle.
To avoid vehicle damage, the power
tailgate cannot be operated with the
radio remote control when a trailer is
electrically connected.
The bulb outage detection function for
trailer brake light cannot detect a
partial bulb outage, e.g. in case of four
times five watt bulbs, the function only
detects lamp outage when only a
single five Watt lamp remains or none
remain.
Fitting of towing equipment could
cover the opening of the towing eye.
If this is the case use the coupling ball
bar for towing.
221

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents