Optional Parts - Fujitsu AU*A45LCLU Design & Technical Manual

13.

OPTIONAL PARTS

Exterior
( x 1 )
( x 1 )
Parts name
Air outlet
shutter plate
Wide panel
Panel spacer UTG-BGYA-W
IR Receiver kit UTY-LRH  A1
Wired remote
controller
Insulation kit
for high
humidity
External
connect kit
( x 2 )
External
control set
( x 2 )
- (01 - 39) -
Model No.
Air outlet shutter plate is
installed at the air outlet
UTR-YDZC
when 3-way direction is
performed.
Wide panel hides the gap
UTG-AGYA-W
between the ceiling hole and
the Decoration panel.
Installation in a space of
256mm or greater is possible
by using panel spacer when
the height behind the ceiling
is low.
(Normal behind the ceiling
installation height is 298mm.)
Unit control is performed by
wireless remote controller
Unit control is performed by
UTB-  UD
wired remote controller
Install when the under roof
condition is expected to be
UTZ-KXGA
the humidity of over 80% and
the temperature of over 30
°C
Use to connect with various
UTY-XWZX
peripheral devices and air
conditioner PC board.
Use to connect with various
peripheral devices and air
UTD-ECS5A
conditioner PC board.
(Set of 6)
Summary