1.
Throttle cable (pull)
2.
Throttle cable (return)
3.
Catch tank hose
4.
Ignition coil
5.
Clamp
6.
Air induction hose (air cut-off
valve - rear of cylinder head)
7.
Catch tank breather hose
A.
Cross the pull and push throttle
cables.
B.
Fasten the catch tank hose and
air induction hose (air cut-off
valve-rear of cylinder head) onto
the frame. Locate the clamp end
facing toward the lower side of
the frame and cut off the tie end.
C.
Fasten the catch tank breather
hose and carburetor breather
hoses together.
2-23
CABLE ROUTING DIAGRAM
D.
Pass the carburetor breather
hose (of the throttle cable cover)
through the hose holder.