Information Codes - Samsung DW-BG970 Series User Manual

Troubleshooting and

information codes

problem
Is too noisy.
Leaves a yellow or brown film
on cups or dishes
Does not have any indicators
lit.
Does not have smoothly
rotating arms.
Leaves a white coating on
cutlery or crockery after
cleaning.
Starts by itself. (DW-BG970)
28_ Troubleshooting and information codes
DD68-00092A_EN.indd 28
possible cause
The dishwasher beeps when the
dispenser cover is opened and
during the initial stage of draining
the pump operation.
The dishwasher is not level.
There is a 'chopping' sound
because an arm is bumping against
the dishes.
This can occurs from coffee and tea
soils.
The power cord is not connected.
The arms are clogged with food
particles.
Hard water was used.
The dishwasher has not been
turned on for more than two days.
solution
This is a normal operation.
Ensure that the dishwasher is level.
Rearrange the dishes.
Use programme with higher
temperature.
Connect the power cord.
Clean the arms.
Check the salt fill indicator and
softener setting is correct according
to the water hardness of your area.
Check salt reservoir cap is correctly
fitted.
This is an automated drying cycle
that keeps the SDP clean and is not
a malfunction. (If you wish to stop
the cycle, press the power button.)
10/14/2011 3:09:05 PM