Philips AW3000 User Manual page 25

1
Unplug the power cord.
2
Hold the numeric key 1 and plug the
power cord again.
» The power/status indicator flashes
amber, then turns solid amber, and after
a while starts to flash amber again.
3
Release the numeric key 1.
Note
•
Do not release the numeric key 1 until the power/
status indicator flashes amber for a second time.
Occasional breaking of music streaming
Do one or all of the following:
•
Move AW3000 closer to your Wi-Fi router.
•
Remove any obstacles between AW3000
and your Wi-Fi router.
• Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
•
Check if your network speed is fast enough
(in cases where multiple devices share the
same router, the wireless performance may
be affected). Turn off the other devices
connected to your home router.
• Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
•
Turn off other Wi-Fi routers.
The power/status indicator remains red. What
can I do?
•
You need to recover the device with an
Ethernet cable.
1
Make sure that your router is connected to
the Internet.
2
Connect the device to the router through
an Ethernet cable (see 'Option 4: Set up
wired connection through an Ethernet
cable' on page 15).
3
Wait for automatic recovery of the device,
which may take up to 10 minutes.
EN 23