Setting Pos (Position Selector) - Eclipse AVN5435 Reference Manual

Adjusting sound quality
I
Setting POS (position selector)
The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-Ieft volume balance can be adjusted for the selected
position.
o
Touching the image of a seat
shown on the
ID
setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
• Touching
(!IiI
will cancel all settings.
• After making settings, touch
1D3I.
The position will be saved and the system will
return to the previous operation screen.
Touch switch Function
Acoustics optimized for
driver's seat
Acoustics optimized for
passenger's seat
Touch switch Function
Acoustics optimized for
both front seats
Acoustics optimized for
rear seats
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page).
• This product is configured for vehicles with a left-side driver's position.