Lenovo ThinkPad Helix 20CG User Manual page 35

Attention: While transferring data to or from a flash media card, or a smart card, do not put your tablet into
sleep or hibernation mode before the data transfer is completed; otherwise, your data could get damaged.
Installing a smart card
Attention:
• Before installing a smart card, touch a metal table or a grounded metal object. This action reduces any
static electricity from your body. Static electricity could damage the card.
• During the data transfer, do not put your tablet into sleep mode before the data transfer finishes;
otherwise, your data could become damaged.
To install a smart card, do the following:
1. Position your tablet as shown and ensure that the metal contacts
and pointing toward the card slot.
2. Insert the card into the slot as shown.
If the plug-and-play feature is not enabled for the installed smart card, do the following to enable the feature:
1. Go to Control Panel.
2. Tap Hardware and Sound.
3. Tap Device Manager. If you are prompted for an administrator password, type the password.
4. From the Action menu, tap Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a smart card
Attention:
• Before removing a smart card, stop the card first. Otherwise, data on the card might get damaged or lost.
• Do not remove the smart card while the tablet is in sleep mode. Otherwise, the system might not respond
when you try to resume operation.
To remove a smart card, do the following:
1. Tap the triangular icon on the taskbar to show hidden icons. Then, tap and hold the Safely Remove
Hardware and Eject Media icon.
2. Tap the item you want to remove to stop the card.
a of the card are facing downward
.
Chapter 2 Using your tablet
27