Table of Contents
Advertisement
Cleaning the exterior of your Iron
To clean the exterior of your iron, wipe it with a soft damp cloth and wipe dry.
Storing
Warning: Allow your iron to completely cool before storing. Always store your iron
on its heel rest. Do not store your iron resting on its soleplate.
The Safe-Store™ heat indicator strip shows you when the soleplate of your iron has
cooled sufficiently for it to be safe to store. If the strip is red, your iron is too hot. When
the words SAFE-STORE appear on the strip against a solid black background, the
soleplate is at a safe temperature for storing.
Never wrap the power cord around the soleplate. The cord can be neatly wrapped
around the heel of your iron.
After sales service
To return a faulty appliance to our Customer Service Department:
1.
Pack it carefully (preferably in the original carton). Ensure the unit is clean.
2.
Enclose your name and address and quote the model number on all
correspondence. Give the reason why you are returning it.
3.
If within the guarantee period, state when and where it was purchased and include
proof of purchase (e.g. till receipt).
4.
Send it to our Customer Service Department at the address below:
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham OL2 5LN, UK.
Telephone: 0800 525 089 Fax: 0161 626 0391
e-mail: enquiriesEurope@jardencs.com
Replacement parts
For additional or replacement parts, please visit www.breville.co.uk or call us on
0161 621 6900.
Troubleshooting
For troubleshooting and FAQs visit www.breville.co.uk/faqs
Turn on your Creativity™
Let the Breville
team help you turn on your creativity with a gateway to a world of food
®
and drinks without limits. You don't have to travel far—just to your computer, tablet or
mobile—where you will discover our FREE website with top tips and recipes to inspire
your imagination. Join us now at www.turnonyourcreativity.com
Electrical safety
This appliance must be earthed.
This appliance is fitted with either a moulded or rewirable BS1363, 13 amp plug. The
fuse should be rated at 13 amps and be ASTA approved to BS1362. If the fuse in a
moulded plug needs to be changed, the fuse cover must be refitted. The appliance must
not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug fitted as detailed below. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
If any other plug is used, a 13 amp fuse must be fitted either in the plug or adaptor or at
the distributor board.
6
Customer Service Department
™
Advertisement
Table of Contents
