Lenovo B50-50 Hardware Maintenance Manual page 61

Figure 15. Removal steps of Antenna, LCD cable, and integrated camera (continued)
Release two antenna cables and one LCD cable from the cable guide. Detach the
adhesive of the antenna to remove them in the direction shown by arrows
When installing:
• Route the antenna cables along the cable guides and secure the antenna
boards with adhesive tapes. As you route the cables, make sure that they are
not subjected to any tension. Tension can cause the cables to be damaged by
the cable guides, or a wire to be broken.
• Make sure that the camera connector is attached firmly.
3
3
Lenovo B50-50
c
.
57