Windshield Washer Fluid - GMC 2010 T-Series Owner's Manual

engine for 10 seconds. This should reset the brake
warning lights. If one or both lights stay on though, see
Hydraulic Brake System Warning Lights under Brake
System Warning Light on page 3 25 for more
information.
What to Use
To determine what kind of fluid to use, see Part C:
Recommended Fluids and Lubricants on page 6 28.
Notice: When adding power steering fluid or making
a complete fluid change, always use the proper
fluid. Failure to use the proper fluid can cause leaks
and damage hoses and seals.

Windshield Washer Fluid

What to Use
When you need windshield washer fluid, be sure to
read the manufacturer's instructions before use. If you
will be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
5-32
Adding Washer Fluid
The reservoir is located behind the front panel on the
driver's side of the vehicle.
Notice:
When using concentrated washer fluid,
follow the manufacturer's instructions for
adding water.
Do not mix water with ready-to-use washer
fluid. Water can cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system. Also,
water does not clean as well as washer fluid.
Open the cap with the
washer symbol on it. Add
washer fluid until the tank
is full.