Cadillac CTS 2012 Owner's Manual page 46

Cadillac CTS/CTS-V Owner Manual (Mid-East) - 2012
2-10 Seats and Restraints
The vehicle comes with two Remote
Keyless Entry (RKE) transmitters.
Each transmitter has a number
1 or 2 on it. These numbers
correspond to 1 and 2 on the
driver door. The current driver is
identified when on the RKE
transmitter is pressed, or when
1 or 2 on the driver door is
pressed.
To recall memory positions, press
and release 1 or 2. The vehicle
must be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission. A single beep will
sound when the button is pressed.
The seat, outside mirrors, and/or
power steering column will move to
the position previously stored for the
identified driver.
Automatic Entry Recall
If entry/exit recall is programmed
on in the vehicle personalization
menu, automatic entry recall occurs
when the ignition is turned on.
See Entry/Exit Recall under
Vehicle Personalization on
page 4 51 for more information.
To stop recall movement,
press one of the power seat,
memory, or outside mirror buttons,
or the power steering column
switch, if equipped.
If something has blocked the
driver seat or the steering column
while recalling a memory position,
the recall may stop. Remove
the obstruction; then press the
appropriate control for the area that
is not recalling for two seconds.
Black plate (10,1)
Try recalling the memory position
again by pressing the appropriate
memory button. If the memory
position is still not recalling,
see your dealer for service.
Exit Recall
(Exit Button): Press to move
the driver seat back a preset
distance and/or the power steering
column, if equipped, up and forward.
A single beep sounds when the exit
feature activates. The vehicle must
be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission.