Chevrolet Corvette Owner's Manual page 192

Hide thumbs Also See for Corvette:
Table of Contents

Advertisement

To select a mode while in PTM, turn
the Magnetic Ride Control/
Performance Traction Management
MODE SELECT knob on the centre
console.
The PTM system contains five
modes. These modes are selected
by turning the Magnetic Ride
Control/Performance Traction
Management MODE SELECT knob
on the centre console. Scroll up or
down through modes 1 5 by turning
the MODE SELECT knob to the
right or left.
The following is a DIC display
description and the recommended
usage of each mode:
PERF TRAC 1 - WET ACTIVE
HANDLING ON
Intended for all driver skill levels.
Wet or damp conditions only -
not intended for use in heavy
rain or standing water.
StabiliTrak is on and engine
power is reduced based on
conditions.
PERF TRAC 2
DRY ACTIVE
HANDLING ON
For use by less experienced
drivers or while learning a new
track.
Dry conditions only.
StabiliTrak is on and engine
power is slightly reduced.
PERF TRAC 3
SPORT
ACTIVE HANDLING ON
For use by drivers who are
familiar with the track.
Dry conditions only.
Driving and Operating
Requires more driving skill than
mode 2.
StabiliTrak is on and more
engine power is available than in
mode 2.
PERF TRAC 4
SPORT
ACTIVE HANDLING OFF
For use by drivers who are
familiar with the track.
Dry conditions only.
Requires more driving skill than
modes 2 or 3.
StabiliTrak is off and available
engine power is the same as
mode 3.
PERF TRAC 5
RACE ACTIVE
HANDLING OFF
For use by experienced drivers
who are familiar with the track.
Dry conditions only.
Requires more driving skill than
in other modes.
StabiliTrak is off and engine
power is available for maximum
cornering speed.
191

Advertisement

Table of Contents
loading

Table of Contents