Adjusting The Mirrors; Homelink® Garage Opener - Acura 2016 RDX Owner's Manual

VEHICLE CONTROLS

Adjusting the Mirrors

Adjust the angle of the mirrors for the best visibility when you are sitting in the
correct driving position.
Automatic Dimming Rearview Mirror
When driving after dark, the automatic dimming
function reduces the glare in the rearview mirror
(and power door mirrors*) from headlights behind
you.
The function cancels when the shift lever is in
Reverse (R).
Power Door Mirrors
Adjust the power door mirrors using the switches on the driver's door when the
vehicle is on.
L/R selector switch: Select the left or right mirror.
After adjusting the mirror, return the switch to the
center position.
Mirror position adjustment switch: Press the
switch left, right, up, or down to move the mirror.
Folding door mirror button*: Press to fold the door
mirrors in or out.
Reverse Tilt Door Mirrors
Either side door mirror can tilt downward when you shift to Reverse (R) to
improve visibility on the selected side of the vehicle when reversing.
When in Reverse, slide the selector switch on the
driver's door to the left or right side.
The mirror returns to its original position when you
shift out of Reverse.
44 |
Folding button*
Selector
switch
Adjustment
switch
Selector switch
*if equipped
HomeLink® Garage Opener
Program your vehicle to operate up to three remote-controlled devices around your
home—such as garage doors, lighting, or home security systems—using the buttons
on the ceiling.
Training a Button
Park near the system you want to program, and follow the instructions in the
flowchart below.
1
Position the remote transmitter
1–3 inches (3–8 cm) from the
HomeLink button you want to program.
2
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a faster
rate after about 10 seconds?
NO YES
a
Press and hold the button on the remote
and the HomeLink button at the same
time. Then, while continuing to hold the
HomeLink button, press and release the
button on the remote every 2 seconds.
Does the LED blink at a faster rate within 20 seconds?
NO YES
To retrain a button or erase codes, see the Owner's Manual on the Owner
Information CD or visit owners.acura.com (U.S.) or www.myacura.ca (Canada). If
you need help, call (800) 355-3515 or visit www.homelink.com.
VEHICLE CONTROLS
Indicator
Buttons
3
Press and hold the programmed
HomeLink button for about a second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold the
complete
HomeLink button
again.
HomeLink indicator HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code. Press
the "learn" button on the remote-
controlled device (e.g., garage door
opener).
b
Within 30 seconds, press and hold the
programmed HomeLink button for 2
seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
| 45