CITROEN Berlingo Owner's Handbook Manual page 58

Steering mounted controls
Selecting the function
- Place the switch in the CRUISE
position. The cruise control is
selected but is not yet active and
no speed has been programmed.
First activation/
programming
a speed
-
- Press the SET - or SET + button.
This programmes/activates the
reference speed and the vehicle will
maintain this speed.
Downloaded from www.Manualslib.com
Temporarily exceeding the
speed
It is possible to accelerate and drive
momentarily at a speed greater than
the programmed speed. The value
programmed fl ashes.
When the accelerator pedal is
released, the vehicle will return to the
programmed speed.
Reach the chosen
speed by pressing
the accelerator.
manuals search engine
Reactivation
-
Your vehicle will return to the last
programmed speed.
Alternatively, you can repeat the "fi rst
activation" procedure.
Deactivation (off)
- Press this button or
the brake or clutch
pedal.
Following deactivation of the cruise
control, press this button.