Igloo FRW312 Instruction Manual page 7

IX Problems Disposal
You can solve many common thermoelectric cellar problems easily, saving you the cost of a
possible service call. Try the suggestion below to see if you can solve the problem before
calling service center.
PROBLEM
thermoelectric
operate.
thermoelectric cellar is not cold
enough.
The light does not work.
Vibrations.
The thermoelectric cellar seems
to make to much noise
The door will not close properly.
LED could not display.
LED display error.
Bottoms are not functional.
cellar do not
POSSIBLE CAUSE
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher
setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The thermoelectric cellar does not have the
correct clearance.
Check the service center.
Check to assure that the thermoelectric cellar is
level.
The thermoelectric cellar is not level.
Check the fan.
The thermoelectric cellar is not level.
The doors were reversed and not properly
installed.
The seal is weak.
The shaves out of position.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
Weak quality of display.
Temperature point is out off.
Temperature controller panel is damaged.