Coaster Brakes - Cannondale SuperSix EVO Owner's Manual

PART I

CoAsTeR BRAkes

1. how the coaster brake works
The coaster brake is a sealed mechanism which is a part of the bicycle's rear wheel hub. The brake is activated
by reversing the rotation of the pedal cranks (indicated by arrow above). Start with the pedal cranks in a nearly
horizontal position, with the front pedal in about the 4 o'clock position, and apply downward foot pressure on
the pedal that is to the rear. About 1/8 turn rotation will activate the brake. The more downward pressure you
apply, the more braking force, up to the point where the rear wheel stops rotating and begins to skid.
WARNING
Before riding, make sure that the brake is working properly. If it is not working properly, have the bicycle
checked by your dealer before you ride it.
WARNING
If your bike has only a coaster brake, ride conservatively. A single rear brake does not have the stopping
power of front-and-rear brake systems.
2. Adjusting your coaster brake
Coaster brake service and adjustment requires special tools and special knowledge. Do not attempt to
disassemble or service your coaster brake. Take the bicycle to your dealer for coaster brake service.
30