Removing The Loading / Feed Motor Assembly - JVC KD-SV3000 Service Manual

2.2.6 Removing the loading / feed motor assembly

(See Figs.12 and 13)
• Prior to performing the following procedure, remove the top
cover, connector board and chassis unit.
(1) Remove the screw C and move the loading / feed motor as-
sembly in the direction of the arrow to remove it from the
chassis rivet assembly.
(2) Disconnect the wire from the loading / feed motor assembly
if necessary.
CAUTION:
When reassembling, connect the wire from the loading /
feed motor assembly to the flame as shown in Fig.12.
1-14 (No.49837)
Loading / feed motor assembly
Fig.12
Loading / feed motor assembly
C
Fig.13