Chevrolet Tavera BS3 Owner's Manual page 17

Hide thumbs Also See for Tavera BS3:
Table of Contents

Advertisement

MIST
OFF
ON
INT
REAR
OFF
LO
HI
Windshield Wipers
To operate the windshield wiper, turn the ignition ON and move the windshield
wiper / washer lever downward. The windshield wipers operate in the following
four position :
OFF
: System off. Default position.
INT
: Intermittent operation. Lever down one level
LO
: Continuous wipe, slow speed. Lever down two levels.
HI
: Continuous wipe, fast speed. Lever down three levels.
Do not operate the wipers when the windshield is dry. It may
windshield glass. Check blades are not frozen to windows before operating in
cold weather. This can damage the wiper motor.
Dust on windshield or on blade reduces the wiper blade life significantly and may
cause streak marks on windshield during wiping. In case the vehicle is not used
for more than a week or if dust is accumulated on windshield or wiper, clean the
windshield and blade before using the vehicle. To clean the blade lift the blade to
service position and wipe the lip of rubber element with clean soft cloth.
Mist Function
To operate the windshield wiper once in case of light rain or mist, lightly move the
windshield wiper / washer level towards the MIST position.
The wipers will operate through one cycle.
11
CAUTION
scratch
the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents