Advertisement
Appendix A – Setup Details
The tested hardware configuration consisted of:
1
• Host
PC: Lenovo® 3000 H Series
2
• Host
PC: Gateway® DX-4822-03
• Nine U170 kit
• 10 LCD monitors
• 10 Keyboards and mice
• 1 D-Link 7-port USB hub
• 1 D-Link 5-port USB hub
• Two 5-meter USB repeaters
Setting up this demonstration is very easy. You simply install NComputing vSpace on the host
PC; then connect each U170 device to a keyboard, monitor, mouse, and host PC (via USB 2.0
cable) and speakers and microphone to their ports.
NComputing is a registered trademark. Other trademarks and trade names are the property of their respective owners. Copyright 2010.
Advertisement
