Advertisement
Rear panel connections
1
2
Power on/off
1
2
AC power socket
3
USB sockets
For connection to the supplied Wi-Fi
antenna, USB HD/flashdisk or optional
BT100 Bluetooth audio receiver.
Note: For Wi-Fi antenna, this must be
plugged into the USB port 1. The USB
ports are not intended for connection to
Apple mobile devices, no functionality,
charging or otherwise is supported.
Front panel connections
1
2
3
4
USB
1
For use with USB audio storage. 1A
maximum current consumption.
Note: This USB port is not intended for
connection to Apple mobile devices.
Standby/On
2
i
(
) Info
3
Displays 'Now Playing' screen. Press to
toggle through various screen layouts.
Home
4
3
4
5
4
Ethernet
5
Digital inputs
6
Digital outputs
USB audio in
7
For connecting to PC/MAC computers.
Ground lift switch
Enable 'Lift' to eradicate hum noise
through the speakers.
5
6
7
Filter
5
Press to toggle through three alternative
digital filter characteristics
Phase
Press and hold for approximately two
seconds to select normal or inverted
(LED lights up) phase output.
Infrared sensor
6
(More)
7
When playing Internet Radio, the More
button displays related options to the
currently selected station such as
alternative stream types, content types
or similar stations. When playing from
UPnP sources, this button displays
queued tracks and options.
8
9
10
6
7
RS232C
8
For control in a custom installation (for
protocol please visit our website).
IR (Infra Red) emitter in
9
10
Control bus
For connection to other azur 8-series
products. Features vary according to
other product functionality.
8
9
10
Display
8
Displays the status of the unit.
Play/Pause
9
Stop/Delete
10
Press during playback to stop or delete
items in various menus.
11
Skip
12
Navigation/Select (rotary
dial)
Rotate to scroll and navigate around
the menus. Press to accept the item/
function shown on the display.
azur
851N
11
12
13
AES/EBU balanced
11
For digital audio connections suitable for
16-24 bit content up to 192kHz.
Unbalanced audio output
12
13
Balanced audio output
For use with XLR connections.
Note: XLR connectors should be wired
as follows: Pin 1: Ground, Pin 2: Hot (in-
phase) and Pin 3: Cold (phase-inverted).
12
11
Return
13
Press to return to the previous menu.
13
3
Advertisement
