Table of Contents
Advertisement
06 Carburetor / intake system
06-02 Removing the carburetor
Pull the contact spring (1) of the choke
lever from the eye in the motor housing
using pliers.
06-02 Removing the carburetor
Pull choke lever from housing with slight
turning movements.
06-02 Removing the carburetor
The cable is taken under the carburetor clip.
To stop it getting in the way during subse-
quent work, fix with adhesive tape position
underneath, if nec. remove contact spring
and choke lever.
1
3
06-02 Removing the carburetor
Push the choke lever in the direction of 'Stop'
in order to swing the arm out of the housing
pocket. Remove cable with flat plug (2) from
guide pocket (3).
06-02 Removing the carburetor
If necessary, pull the round plug contact
inserted from the back out of the pocket
using pliers.
4
06-02 Removing the carburetor
Completely loosen 2 vertical fixing screws
for the connecting muff (4).
2
Page 17
Hide quick links:
Advertisement
Table of Contents
