Appendix; Powersaver - Samsung SyncMaster 955DF Owner's Instructions Manual

Adjusting Your Monitor

PowerSaver

This monitor has a built-in power management system called PowerSaver. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time. The available modes are "On," "Standby,"
"Suspend," and "Off".
This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
See the table below for details.
Table 1. Power-saving modes
State
Horizontal Sync Active
Vertical Sync Active
Video Active
Power Green
Indicator
Power 110W (Max.)
Consumption 100W (Nom.)
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
This monitor is EPA E
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Normal
Standby Mode
Operation
Inactive
Active
Blanked
Amber
55W(Nom.)
TAR ®
S compliant and NUTEK compliant when used with a
NERGY
English - 22
Power-Saving Function mode (EPA/NUTEK)
Suspend Mode
Position A1
Active
Inactive
Blanked
Amber/Green
Blinking
(0.5 sec interval)
Less than 15W
Power-off Mode
Position A2
Inactive
Inactive
Blanked
Amber
Blinking
(1 sec interval)
Less than 3W