Toshiba RAV-SM563UT-E Owner's Manual page 8

Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
ON / OFF
button only.
10
2
5
3
1
Air volume select button
Selects the desired air volume mode.
2
Timer set button
TIMER SET button is used when the timer is
set up.
3
Check button
The CHECK button is used for the check
operation. During normal operation, do not
use this button.
4
Fan button
FAN button is used when a fan which is sold
on the market or etc. is connected.
• If "No function
remote controller when pushing the FAN
button, a fan is not connected.
5
Filter reset button
Resets (Erases) "FILTER
6
UNIT and AUTO louver button
UNIT
(No function)
SWING/FIX
7
Operation lamp
Lamp is lit during the operation. Lamp is off
when stopped.
Although it flashes when operating the protec-
tion device or abnormal time.
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL
" is displayed on the
" display.
1 7
ON / OFF
FAN MODE
SWING/FIX VENT
UNIT
8
ON / OFF
button
When the button is pushed, the operation
starts, and it stops by pushing the button
again.
When the operation has stopped, the opera-
tion lamp and all the displays disappear.
9
Operation select button
Selects desired operation mode.
10
Set up temperature button
Adjusts the room temperature.
Set the desired set temperature by pushing
or
OPTION :
Remote controller sensor
Usually the TEMP . sensor of the indoor unit senses
the temperature. The temperature on the surround-
ing of the remote controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
5
8
9
4
6
.