Sharp compet cs-2850a Operation Manual page 9

2) When the grand total mode selector is in the ON
3) The memory item counter will count the number of
"IC+" position: 1) The counter will count the number of times that the
2) When the grand total mode selector is in the ON
3) The memory item counter will count the number of
•
" " position: Neutral, counter is turned off.
Note: The counter has a maximum capacity of 3 digits (up to ±999). If
the count exceeds the maximum, the counter will recount from
zero.
PAPER FEED KEY:
When pressed, advances the paper.
Note: You can also pull the paper manually.
RIGHT SHIFT KEY:
Operation of this key in entered numbers or calculated results shifts the
number one digit to the right together with the decimal point. Used for
one digit correction.
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear the count,
press the key.
times that the
tion.
Note: • Each time the
traction, 1 will be subtracted from the count.
• The count is printed when the memory is
recalled.
• Pressing of the
or has been pressed in addition and subtrac-
tion.
Note: • The count is printed when the calculated
result is obtained.
• Pressing of the
clears the counter.
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear the count,
press the key.
times that the
addition and subtraction.
Note: • The count is printed when the memory is
recalled.
• Pressing of the
7
key has been pressed in the addi-
key is used in the sub-
key clears the counter.
, , ,
or key has been pressed in
key clears the counter.
or key