Getting Started; M7Cl Network Setup - Yamaha M7CL StageMix V5 User Manual

Yamaha Professional Audio

3.0 Getting Started

3.1

M7CL Network Setup

Connect the Wi-Fi access point to the M7CL console's network port via a
CAT5 cable. Note that a cross-over cable will be needed with older access
points that don't have the "auto MDIX" function. Most recent devices will
support "auto MDIX", in which case a straight CAT5 cable can be used.
Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi
device and not the WAN port.
Note the IP address and MAC address of the M7CL console - they will need to
be entered into the iPad later. They can be found in the console as follows:
a. Press the [SETUP] button on the M7CL touchscreen
b. Press [NETWORK] on the M7CL touchscreen
M7CL StageMix V5 User Guide
Page 6