Siemens ConnexxLink User Manual page 33

Connecting ConnexxLink and Bluetooth
dongle
Turn ConnexxLink on by pressing the

on / off button.
When the Bluetooth symbol on the screen
stops blinking, the Bluetooth dongle and
ConnexxLink are connected.
ConnexxLink will go into stand-by mode after
60 minutes of inactivity.
Turn ConnexxLink back on by pressing the

on / off button.
Wireless streaming of the Tek connect remote
control blocks the programming signal of Con-
nexxLink.
When programming hearing instruments wire-

lessly do not use the audio streaming function
of the Tek connect remote control.
Start the Connexx detection dialog via the button "De-

tect connected instruments" in the toolbar or on the
hearing instrument's task card.
Choose ConnexxLink as the detection device.

Follow the steps in Connexx to detect and program the

hearing instruments.
Working with ConnexxLink
DE
EN
FR
IT
NL
VL
33