Please Note - Polaris Mazda BT50 RW-50/15 Installation Instructions Manual

Plug A
e
Plug B
• Plug all applicable cables into
Step 5 - Mount OEM CD Housing
1. Before re-mounting the OEM CD
Housing we suggest positioning the
power amplifier box just behind it.
4. Mount the CD housing back into
position and secure in place with the
original screws.
F. Wiring Diagram
Connect to RW-50 Interface
Plug E
Connect to RW-50 interface
Connect to RW-50 interface
HARNESS 1
2. Connect

PLEASE NOTE:

If your Mazda BT-50 originally had the OEM GPS system installed, you
need to plug in a different radio antenna. Instead of using the radio
antenna that normally plugs into the back of the OEM CD housing
(the connector that you originally unplugged), you must use the radio
antenna that was originally plugged into the the back of the OEM
GPS Screen (it is the black connector).
Harness 2
Video out 1
Video out 2
DVR video input
AUX-IN video input
Reverse camera
Reverse camera trigger
Power amplifier box
Harness 1
and HARNESS 2 (e.g. Bluetooth Mic, Media USB cable etc)
PLUG D into the back of
OEM CD housing
8
Media USB
Microphone
Connect to the power harness
of car original head unit
Plug C
Plug D
Connect to OEM CD Housing
Connect to car original head unit
3. Plug the radio antenna into the
back of the OEM CD housing