Table of Contents
Advertisement
F_USB1~2: Front Panel USB 2.0 headers (F_USB1 supports EZ Charger)
The motherboard has two USB 2.0 headers supporting four USB 2.0 ports. Addition-
ally, some computer cases have USB ports at the front of the case. If you have this
kind of case, use auxiliary USB connector to connect the front-mounted ports to the
motherboard.
Unlike F_USB2 in this mainboard, F_USB1 supports EZ Charger technology, pro-
vides 3 times current than general USB port in off mode for USB devices. It is useful
and excellent, especially for the iPhone, iPad and iPod touch devices that need a
large amount of current for faster recharging within less time.
Pin
Signal Name
1
USBPWR
2
USBPWR
3
USB_FP_P0-
4
USB_FP_P1-
5
USB_FP_P0+
6
USB_FP_P1+
7
GND
8
GND
9
Key
10
NC
Please make sure that the USB cable has the same pin assignment as
indicated above. A different pin assignment may cause damage or system
hang-up.
F_1394A: Front 1394 header (Optional)
Connect this header to any device with IEEE 1394a interface.
Pin
Signal Name
1
TPA+
3
GND
5
TPB+
7
Cable-Power
9
Key Pin
Function
Front Panel USB Power
Front Panel USB Power
USB Port 0 Negative Signal
USB Port 1 Negative Signal
USB Port 0 Positive Signal
USB Port 1 Positive Signal
Ground
Ground
No pin
Not connected
Pin
Signal Name
2
TPA-
4
GND
6
TPB-
8
Cable-Power
10
GND
Installing the Motherboard
17
Advertisement
Table of Contents
