Ryobi RCS4235B Type III Original Instruction page 8

Table of Contents

Advertisement

English (Original Instructions)
Keep all bystanders and animals at least 15m away.
Add bar and chain oil every time you add fuel to the chainsaw.
Guaranteed sound power level is 114 dB.
Conforms to all regulatory standards in the country in the EU where the product is purchased.
Conforms to all regulatory standards in Russia where the product is purchased.
Use unleaded petrol intended for motor vehicle use with an octane rating of 91 ([R+M]/2) or
higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refueling.
Turn ignition switch to the ON position.
Set the chain brake to the BRAKE position.
Fully press and release the primer bulb at least 10 times.
Pull the choke lever all the way out the START position.
Pull the starter rope until the first firing of the engine is heard (no more than five pulls).
Set the choke lever to the RUN position.
Pull starter grip until the engine starts.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rcs4240b type iii

Table of Contents