Installing And Replacing Backup Batteries - Timex T236 User Manual

Your new Timex Clock Radio includes 2 AA batteries (installed). This battery backup
system will maintain the time and alarm settings during a temporary power interruption.
When the Battery Low Indicator on the top left of the display is lit, it's time to replace
the batteries.
1
1. Keep unit connected to AC power when changing batteries to avoid losing your
settings.
2. Slide the battery door to release then open and remove the battery door.
3. Install 2 fresh "AA" batteries. Check and match the correct polarity (+/ -) markings
in the battery compartment.
4. Replace the battery door.
NOTE: With batteries installed, the display will turn off during a power failure but the
clock will continue to run and maintain your alarm settings and the alarm will sound.

Installing and Replacing Backup Batteries

2
AUX-IN
DC 5V
Press
3
DST TIME ZONE
15
AUX-IN DST TIME ZONE
DC 5V