Preparation
Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Turn the camera on.
•
The status indicator 1 lights when you turn this unit
on.
A [MENU/SET] button
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P115)
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
and check that the display reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
Select [CLOCK SET] in the [SETUP] menu, and press 1. (P54)
•
It can be changed in steps
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
You can set the year from 2000 to 2099.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP] (P144) or order a photo studio to print the pictures.
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
30
VQT3A55
Changing the clock setting
3
4
5
,
and
to set the clock.
:
:
"
Changing the clock setting
ON
OFF
"
procedure.