Table of Contents
Advertisement
l
Tuning
~~, ,~'!!..
MENU
.
t
~
~
t
Move to choose Setup menu.
0=':::'0
:.)(8),0,(8,
;1 ':2) (~::
',4. !.s:; '~i
,-?: .~) \!1')
;~: ,:0) (,:o:J
Access Setup menu.
Move to choose Tuning menu.
,.".)-=,
YJ'AJ,~rFJ
'~I~CFJ
--
Access Tuning menu.
Move to choose Manual tuning.
Access Manual tuning.
tIb\
~
.
TV/AV
.
Select the programme position to be tuned.
Press repeatedly
until required
station is found.
When the desired station is found, press the OK button to store.
The programme
position
will flash.
Press the TV/AV button at any time to go back to watching
TV.
It is also possible to use the control panel buttons on the top of the TV to tune individual programme positions:
Press F until Tuning mode is reached.
F
()
-N
+/1\
0 ()
Press -IV or +//\ to access Tunilng mode.
Press F until Manual tuning is reached.
F
()
-N
+//\
() a
TV/AV
()
Example: TX-20LA2M
-N
+//\
() 0
sm
0
Press -IV or +/ A to access ManlLial tuning.
Press TV/AV to move between Change programme, Search
and Change sound system.
Press -IV or +/ A to change programme position or start search.
When the desired station is found, press STR to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Press F at any time to exit the Tuning menu.
F
()
Notes:
.If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the Colour system
selection on page 12.
~
.After the Manual tuning is finished, press the Programme Number up button to confirm the tuning condition for each
Programme Numbers. If some Programme Numbers ar~ unused, it is possible to skip such Programme Numbers.
Please refer to the Skip function on page 12.
.When using a VCR without video and audio input I output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to Programme No."O". In that case,
perform Manual tuning after setting the Colour system and Sound system in advance. Further, in multi-system
VCR, it is more convenient to set the designated channel to several Programme Numbers.
15
It is possible to retune individual programme positions:
Press the MENU button.
Advertisement
Table of Contents
