Panasonic NC-SK1 Operating Instructions Manual page 19

3
Turn on the power switch.
(Press " ")
During use, the power indicator
lights up.
When the water has boiled, the power
(
switch turns off automatically.
The kettle takes around 6 minutes to
boil. Water temperature 23 °C, room
temperature 23 °C, water to max level,
230 V.
• To stop boiling before the
water has boiled, turn off
the power switch.
Note
• Immediately after the water has boiled,
do not force the kettle to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
1 Allow the body to cool sufficiently.
 Remove the body from the power base and fill the water.
 Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.
Start boiling the water.
)
(
Power indicator
lights up.
)
4
Remove from the power
base and pour.
 After use, pour out any remaining
water.
* Keep the lid closed when pouring
away the water.
19