Meanings and required responses to major messages displayed on LCD monitor.
[MEMORY CARD ERROR]
●
The card format cannot be used with this camera.
→ Save needed data on a computer or other device, and then use [FORMAT] on the camera. (→21)
[INSERT SD CARD AGAIN]
●
Access to card has failed.
→ Insert card again.
●
Try with a different card.
[MEMORY CARD ERROR]
●
Card is not of SD standard.
●
When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are
supported.
[READ ERROR]/[WRITE ERROR]
●
Data read has failed.
→ Check whether card has been inserted correctly (→10).
●
Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.
●
Card may possibly be damaged.
●
Try with a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING
SPEED OF THE CARD]
●
When recording motion picture, use a card rated with an SD speed class ∗ of 'Class 6' or higher.
∗ SD speed class refers to a specification for sustained write speeds.
●
If recording stops even when using a card with speed of 'Class 6' or faster, the data writing speed is
low. We recommend backing up the data on the memory card and reformatting it. (→21)
●
Motion picture recording may be automatically terminated with certain cards.
[A FOLDER CANNOT BE CREATED]
●
Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [FORMAT] on the camera. (→21)
[PICTURE IS DISPLAYED FOR 16:9 TV]
●
AV cable is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV ASPECT] (→21).
●
USB connection cable is only connected to camera.
→ Message disappears when cable is also connected to another device.
[THIS BATTERY CANNOT BE USED]
●
Use a genuine Panasonic battery.
●
Battery cannot be recognised as terminal is dirty.
→ Wipe any dirt away from the battery terminal.
[NO BATTERY POWER REMAINS]
●
The battery level is low.
→ Charge the battery before use. (→8)
[FORMAT THIS CARD?]
[TRY ANOTHER CARD]
[MEMORY CARD PARAMETER ERROR]
[PLEASE CHECK THE CARD]
[PICTURE IS DISPLAYED FOR 4:3 TV]
83
VQT2N02