Disassembly And Assembly Instructions - Samsung GT-i5700 Service Manual

11. Disassembly and Assembly Instructions

11-1. Disassembly Instructions
1)Remove the 'Rear' by unscrewing those 6
1 points on the picture. detach Rear case.
2)With the disassembly JIG unhook the rear
cover
1) SCREW Torque: 1.2 ~ 1.4kgf.cm
2) Make sure not to damage the rear and leave
scratch on it
1)Remove the SUS by unscrewing these 1
points on the below picture.
3
2)Take off the RCV Ass`y connector from
PBA
1) SCREW Torque: 1.2 ~ 1.4kgf.cm
2) please detach the shield-can vertically,
make sure not to damage clip.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1)With dissamembly JIG, Use the disassembly
hole(3Points)
2
1
2
3
1) Make sure not to damage the rear and leave
scratch on it
1) Seperate the PBA from bracket.
2) Detach 3 connector form PBA.
4
1) Make sure not to damage the connectors and
FPCB.
11-1
1
2
3