BMW 2012 G 650 GS Sertao Rider's Manual page 86

8
84
Insert bulb socket 1 into head-
light housing.
Install the instrument cluster
using the procedure described
z
in the previous section.
Replacing front and rear
turn indicator bulbs
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To prevent contaminants from
being deposited on the new