Clock Setting - Kenwood K25MMS14 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00", and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock button once. "0:00" will be
displayed on the LED panel.
2. Turn the Timer/Weight/Auto Menu dial to set the
hour. The hour input should be within 0-23 hours.
3. Press the Clock button to confirm the hour. The
minute digits will also begin flashing.
4. Turn the Timer/Weight/Auto Menu dial to set the
minutes. The minutes input should be within 0-59
minutes.
5. Press the Clock button to confirm the minutes.
6. ":" will flash.
• This is a 24-hour clock. When the microwave is
connected to the mains power for the first time, or
when the power resumes after a power interruption, the
LED display will show "0:00". To re-set the clock, follow
the above 6 steps.
• While setting the clock, if you press the Stop/Clear
button, or if there is no operation within 1 minute,
the microwave will return to its previous status
automatically.
• To find out the current time while the microwave is in
use, press the Clock button. It will display the current
time for 2-3 seconds, then return to the remaining
cooking time.
1, 3, 5
2, 4
17