Table of Contents
Advertisement
Traxxas Link Model Memory
Traxxas Link Model Memory is an exclusive, patent-pending feature
of the TQi transmitter. Each time the transmitter is bound to a
new receiver, it saves that receiver in its memory, along with all
the settings assigned to that receiver. When the transmitter and
any bound receiver are switched on, the transmitter automatically
recalls the settings for that receiver. There is no need to manually
select your vehicle from a list of model memory entries.
Model Lock
The Traxxas Link Model Memory feature can store up to thirty
models (receivers) in its memory. If you bind a thirty-first receiver,
Traxxas Link Model Memory will delete the "oldest" receiver from
its memory (in other words, the model you used the longest time
ago will be deleted). Activating Model Lock will lock the receiver in
memory so it cannot be deleted.
You may also bind multiple TQi transmitters to the same model,
making it possible to pick up any transmitter and any previously
bound model in your collection and simply turn them on and drive.
With Traxxas Link Model Memory, there is no need to remember
which transmitter goes with which model, and there is never a need
to have to select any model from a list of model memory entries. The
transmitter and receiver do it all for you automatically.
Transmitter LED Codes
LED Color / Pattern
Solid green
Slow red (0.5 sec on / 0.5 sec off )
Flashing fast green (0.1 sec on / 0.15 sec off )
Flashing medium red (0.25 sec on / 0.25 sec off )
Flashing fast red (0.125 sec on / 0.125 sec off )
Programming Patterns
or
Counts out number (green or red) then pauses
x
8
Fast green 8 times
x
8
Fast red 8 times
Receiver LED Codes
LED Color / Pattern
Solid green
Slow red (0.5 sec on / 0.5 sec off )
Flashing fast red (0.125 sec on / 0.125 sec off )
FCC Compliance
This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses and can radiate radio frequency energy,
and, if not operated in accordance with the instructions, may cause harmful interference to radio communications. The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Statement
This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body or bystanders and must not be co-located or operated in conjunction with any other antenna or transmitter.
To activate Model Lock:
1. Switch on the transmitter and receiver you wish to lock.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET. The status LED will blink green in single-flash intervals.
5. Press SET once. The status LED will blink red once repeatedly.
6. Press MENU once. The status LED will blink red twice repeatedly.
7. Press SET. The LED will blink rapidly green. The memory is now
locked. Press and hold MENU to return to driving mode.
Note: To unlock a memory, press SET twice at step 5. The LED will
blink rapidly green to indicate the model is unlocked. To unlock all
models, press MENU twice at step 6 and then press SET.
To delete a model:
At some point, you may wish to delete a model you no-longer drive
from the memory.
1. Switch on the transmitter and receiver you wish to delete.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET once. The status LED will blink green once repeatedly.
5. Press MENU once. The status LED will blink green twice
repeatedly.
6. Press SET. The memory is now selected to be deleted. Press SET to
delete the model. Press and hold MENU to return to driving mode.
Name
Normal Driving Mode
Binding
Throttle Trim Seek Mode
Low Battery Alarm
Link Failure / Error
Current menu position
Menu setting accepted (on SET)
Menu SET invalid
Name
Normal Driving Mode
Binding
Fail-Safe / Low Voltage Detect
Notes
See page 4 for information on how to use your transmitter
controls.
See page 5 for more information on binding.
Turn the Multi Function knob right or left until the LED stops
flashing. See above for more information.
Put new batteries in the transmitter. See page 4 for more
information.
Transmitter and receiver are no longer bound. Turn the system
off and then back on to resume normal operation. Find source of
the link failure (ie out of range, low batteries, damaged antenna).
See Menu Tree for more information.
User error such as trying to delete a locked model.
Notes
See page 4 for information on how to use your transmitter
controls.
See page 5 for more information on binding.
Consistent Low Voltage in the receiver triggers Fail-Safe so there
is enough power to center the throttle servo before it completely
loses power.
13
Advertisement
Table of Contents
