Extension Table (Storage Box); Free Arm; Presser Foot Lever And Additional Presser Foot Clearance - ELNA EXPRESSIVE 820 Instruction Manual

Extension Table (Storage Box)

Most accessories are stored inside the extension
table.
To Open:
Pull cover towards you. Lift out the packet of
accessories.

Free Arm

Remove the extension table to access the free
arm.
To Remove:
Lift out extension table away from the machine, as
shown.
NOTE: Always embroider with the extension table
attached unless using optional free arm hoop C.
See page 92.
To Attach:
Place tabs over slots and push down on table.
Presser Foot Lever and Additional Presser
Foot Clearance
q
Raise and lower the foot with this lever .
Before sewing can occur, the presser foot must be
lowered to close the tension discs.
You can raise the presser foot about 6.5 mm (1/4")
higher than the normal up position for easier
q
q
removal of the hoop. Pull the presser foot lever
up beyond the normal up position.
10