GMC Acadia 2014 User Manual page 87

If you know the command you
would like to execute, say the
command. If the command is not
known, say Help while in any voice
recognition menu.
See Voice Recognition on page 78.
Noise: The system may not
recognize voice commands if there
is too much background noise.
When to Speak: A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak: Speak clearly in a
calm and natural voice.
Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
volume bar during a call to change
the volume level. The adjusted
volume level remains in memory for
later calls. The system maintains a
minimum volume level.
Pairing a New Bluetooth
Device
1. Press the Settings screen button
on the Home Page to access the
Settings menu. Press Bluetooth
Device List from the Settings
menu to display the devices that
have been connected previously.
From this screen, either delete
or add more devices.
2. Press the New Device screen
button to start the process of
adding a new Bluetooth device
to the radio system.
3. Once New Device is pressed,
the radio becomes discoverable
for three minutes.
Infotainment System
4. When a device is discovered,
the screen changes to the
pairing screen. If the Bluetooth
device does not connect to the
radio within 60 seconds, the
screen times out, returns to the
Bluetooth Device List, and
cancels the discoverable
process.
5. During the start of the pairing
process, a pop-up screen will
display on the bluetooth device
asking to select <Your Vehicle>.
If a PIN is to be entered, use
XXXX. Enter the PIN into the
Bluetooth device.
87