Basic Set-Up Of The Twinloc Remote Control Of Fox Nude Shock - Scott Genius 700 User Manual

•
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX
NUDE SHOCK
To ensure perfect function of the FOX Nude shock it is very important to follow the steps
shown below exactly.
On Genius Carbon frames you will find an internal cable routing.
Push the inner cable first through the remote lever in
the upper cable routing of the lever and then through
the cable housing as shown below inside the toptube.
| 12 ENGLISH
On Genius alloy frames a regular
outside cable routing, the outer
cable housing is fixed on cable
mount ports with cable zippers.
1. loosen the cable fixing screw (S7) by
turning it counter clockwise with a 2mm
allen key.
2. insert a new cable via lever hole and cable
housing and push it into the shock as shown
around the remote wheel (S6).
GENIUS | 2016 BIKE USER MANUAL 2016 BIKE USER MANUAL | GENIUS
3. tighten the cable and fix the cablefixing
screw (S7) by turning it clockwise with a
2mm allen key and a max. tightening torque
of 1.6Nm.
4. Check that the handlebar lever is in the
traction position. Refer to the following
diagrams.
5. cut the cable approx. 20mm away from
the remote wheel. Fix it by squeezing it
with pliers.
6. push a cable end-cap on the cable until
it touches the end of the cable. Fix it by
squeezing it with pliers.
ENGLISH 13 |