Registering The Handset; Making Internal Calls - Gigaset A59H User Manual

Registering the handset

Before you can use your handset, it must be
registered to the base station. You must ini-
tiate handset registration on the handset
and on the base station.
Note: If the handset has been delivered
with a base station it is registered
On the base
¤
Activate the registration function.
f
On the handset
¢
¢
(open menu)
~
REGISTRATION
(enter current PIN, default: 0000)
The handset is assigned the lowest unas-
signed internal number (1–4).
Once the handset has been registered suc-
cessfully, it returns to idle mode. The name
(default: Gigaset) and the handset's internal
number is shown in the display, e.g.
.
Gigaset 1
If the handset was not registered success-
fully, the display will show
this case repeat the procedure.
Please note
◆
The default system PIN may have
been changed, (
◆
¢
The handset name can be changed,
( page 15).
Deregistering the handset
f
¢
Precondition: the handset is in idle mode.
¢ ¢
(open menu)
~
UNREGISTER
p
¢
(enter current PIN)
|
¢
(select handset to be deregistered)
A long confirmation tone indicates the suc-
cessful deregistration. The handset display
will show
PLS REG H/S
Please note
Do not deregister handsets unless necessary!
|
¢
ADVANCED SET
PLS REG H/S
¢
page 16).
|
ADVANCED SET
|
¢
.
14

Making internal calls

Internal calls are free calls to other handsets
that are registered to the same base station
or to the base station itself.
Calling another internal participant
k
¢
cipant)
0 = base station, 1-4 = handset number,
* = all
|
¢ If only 1 handset is registered you need not
enter a number to call the handset from the
base.
|
¢
Accepting internal call
¤
To answer the call press
¤
To end the call, press
Incoming call during internal call
An incoming call is indicated by an acoustic
c
signal.
(answer external call, end internal call)
k
or
. In
k
¢
(hold internal call, accept external call)
Internal consultation calls
When you are speaking to an external par-
ticipant, you can call an internal participant
at the same time for consultation.
Press and hold
k
hold) ¢
cipant)
|
¢
You are connected with the internal parti-
k
cipant.
(toggle between internal and external
participant)
Transferring a call to another handset
You can transfer an external call to another
k
handset.
k
¢
(put external call on hold)
cipant)
You are connected with the internal parti-
cipant.
~
(enter internal number of parti-
(start conference)
k
(put external call on
~
(enter internal number of parti-
~
(enter internal number of parti-
c
a
.
.