Panasonic NV-DV2000 Service Manual page 92

17 Infra-red Transmitter window
18 OK button
To start Manual editing and to store the selection
on the SET UP or EDIT MENU screen.
19 VIDEO INSERT button
For the Video Insert function and the AV Insert
function.
20 AUDIO INSERT button
For the Audio Insert function and the AV Insert
function.
21 AUDIO DUB button
For the Audio Dubbing function or the Audio Mixing
function.
22 JOG/SHUTTLE button and lamp
To switch to the Jog/Shuttle mode. When the button
is pressed, it lights and the VCR enters the Jog/
Shuttle mode.
In the stop mode: Still picture (Jog/Shuttle mode).
During playback: Still picture (Jog/Shuttle mode).
23 INPUT SELECT button
To select the A1, A2, A3, A4 or DV IN (DV1 or DV2)
external recording source.
24 COUNTER RESET button
To reset the tape counter (elapsed time) to
"0:00.00".
≥ The tape counter is automatically reset to
"0:00.00". when a video cassette is inserted.
≥ It is not possible to reset the Time code to
"0h00m00s00f " using COUNTER RESET.
25 COUNTER ZERO STOP button
To use the zero stop function at the tape counter
display.
26 PLAYER button
To operate this VCR as the playback unit for
editing.
27 SEARCH SELECT button
To search for a recorded programme using the
index/photoshot index search.
17 18 19 20 21
DIGITAL VCR
24 25 26 27 28
22
29
28 RECORDER button
To operate this VCR as the recording unit for
editing.
29 INDEX/PHOTO buttons
For the index/photoshot index search function.
30 STEREO SELECT button
To select the audio track (STEREO1 audio and/or
STEREO2 audio) on a tape which was recorded in
the 12bit audio mode. During playback, each time
the button is pressed, the sound changes as
follows:
STEREO1
≥ The audio track cannot be selected during the
playback of a tape recorded in the 16bit audio
mode.
≥ When INPUT SELECT is set to DV1 or DV2, the
audio track can be selected by STEREO
SELECT at any time: it does not have to be
during playback.
31 VCR1/2/3 switch
Set the switch on the side panel of the editing
controller to the appropriate position when more
than two or three Panasonic VCRs is being used.
VCR1:
VCR2:
VCR3:
! " Child Lock buttons
To set the child lock function when you keep
pressing OK and MARK IN for more than five
seconds.
17 23
30 31
STEREO2
Select this position on both the
VCR and editing controller for
normal use with one VCR.
Select this position when using two
Panasonic VCRs.
Select this position when using
three Panasonic VCRs.
STEREO1
STEREO2
(MIX)