Recording A Time Lapse Movie - Casio Exilim EX-FC500S User Manual

. To shoot a Prerecord Movie
1.
After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2.
When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3.
Press [0] (Movie) again to stop recording.
• To turn off Prerecord Movie recording, press [MODE] and then select
"Ù" (Program Auto) or "Ý" (Premium Auto Pro).
• When shooting with the high speed movie "HS30-120" and "HS30-240" setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [0] (Movie) to start real-time recording.
NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With high-
definition (FHD) and standard (STD) movie, you can shoot still images while
realtime movie recording is in progress.
Recording a Time Lapse Movie (Time Lapse)
You can use this function to record movies of natural events that occur over time, to
speed up the flow of traffic in a city scene, or to record other similar types of movies.
• When using this function, shooting with a tripod is recommended.
• To prevent loss of power while shooting, use a fully charged battery.
• Make sure the memory card you are using has sufficient unused space before
shooting with this function.
• Focus is fixed at what they are when shooting is started.
• For some scenes, brightness and white balance settings are fixed at what they are
when shooting is started.
1.
In the REC mode, press [MODE].
2.
Use [8], [2], [4], and [6] to select "¬" (Time Lapse), and then press
[SET].
This will display a menu of Time Lapse scenes.
3.
Select the scene you want to use and then press [SET].
• To select a different scene, perform either of the operations below.
– Repeat the above procedure from step 1.
– Press [SET], use [8] and [2] to select the "
[SET], and then select the scene you want.
" Control Panel option, press
78
Recording Movies