Jenn-Air W156 Use And Care Manual page 34

If foods bake unevenly:
• the oven may be installed improperly.
• check the oven rack with a level.
..... • stagger pans; do not allow pans to touch each other or oven wall.
• check instructions for suggested placement of pans on oven rack.
If cooking results are less than expected:
• the pans being used may not be of the size or material recommended for best
results.
• there may not be sufficient room around sides of the pans for proper air circula-
tion in the oven.
• check instructions for preheating, rack position and oven temperature.
If baking results differ from previous oven:
• oven thermostat calibration may differ between old and new ovens. Follow recipe
and use and care directions before calling for service since the calibration on
the previous oven may have drifted to a too high or too low setting.
If PROBE does not work:
• check to be sure probe plug is properly inserted into oven receptacle.
• probe may not be positioned in food properly.
• probe temperature may have been improperly set.
If F plus a number appear in the Display:
• these are fault codes. If a fault code appears in display and a continuous beep
sounds, push the CANCEL Pad. If the fault code reappears, disconnect power
to the oven and call an authorized Jenn-Air Service Contractor.
• call
Jenn-Air Service
can
service.
35