Philips HTS6600 Service Manual page 19

Dismantling Instructions & Service Positions
4.1.2 Dismantling of SD9.2 MPEG board
1) In order to dismantle the SD9.2 MPEG Board1070, it
is necessary to remove the Rear Cabinet, USB, HDMI,
SCART, and IPOD boards together with bracket 146. The
mounting screws for the bracket 146 are shown in
fi gure 8. Please keep in mind that the EMC Copper tape
153 shown in fi gure 9 should be at the correct place while
assembling the set after repair.
Figure 4-8
EMC Copper Tape
Figure 4-9
H
3139 785 32530
2) After removing the bracket 146, remove 4 mounting
screws to dismantle the SD9.2 MPEG Board 1070 as
shown in fi gure 10.
I
Figure 4-10
4. EN 19