Audio Settings; Audio Output - Sony HT-RT5 Operating Instructions Manual

Note
• If your device manufactured by Sony is not
detected when [Auto1] is selected, the
setting will have the same effect as [Auto2]
setting.
 [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of
external device, and then switches to the
matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Select this when connecting to a
device with an HDCP compliant DVI jack.
 [HDMI Deep Color Output]
[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video
signals when the connected TV is
compatible with Deep Color.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
 [Video Direct]
You can disable the On-Screen Display
(OSD) of the Bar Speaker when [HDMI1],
[HDMI2] or [HDMI3] input is selected.
This function is useful when playing a
game, you can fully enjoy the game's
screen.
[On]: Disables the OSD. Information will
not display on the TV screen and the
OPTIONS and DISPLAY buttons will not
work.
[Off]: Displays information on the TV
screen only when you change the
settings, such as when selecting the
sound field.
 [SBM] (Super Bit Mapping)
[On]: Smooths the gradation of video
signals output from the HDMI OUT (ARC)
jack.
[Off]: Select this if video signals are
distorted or color is unnatural.
26
US

[Audio Settings]

 [DSEE]
This function is only available when
[Music] is selected as the sound field.
[On]: Enhance sound quality by restoring
high-range sound (page 11).
[Off]: Off
 [Audio DRC]
You can compress the dynamic range of
the sound track.
[Auto]: Automatically compresses sound
encoded in Dolby TrueHD.
[On]: The system reproduces the sound
track with the kind of dynamic range that
the recording engineer intended.
[Off]: No compression of dynamic range.
 [Attenuation settings - Analog]
Distortion may occur when you listen to a
device connected to the ANALOG IN jack.
You can prevent distortion by attenuating
the input level on the system.
[On]: Attenuates the input level. The
output level will decrease at this setting.
[Off]: Normal input level.
 [Audio Output]
You can select the output method used
for audio signal output.
[Speaker]: Outputs multi-channel sound
from the system's speakers only.
[Speaker+HDMI]: Outputs multi-channel
sound from the system's speakers and 2-
channel linear PCM signals from the HDMI
OUT (ARC) jack.
[HDMI]: Outputs sound from the HDMI
OUT (ARC) jack only. Sound format
depends on the connected device.
Note
• When [Control for HDMI] is set to [On]
(page 28), [Audio Output] is set to
[Speaker+HDMI] automatically and this
setting cannot be changed.