Removing the shipping struts
^ Release the catch and turn the left
hand shipping strut clockwise by 90°.
^ Then withdraw the shipping strut
^ Release the catch and turn the right
hand shipping strut
counter-clockwise 90°.
^ Then remove the shipping strut.
,
The shipping strut holes must be
covered after they have been
removed. Otherwise there is a risk of
injury.
^ Plug the holes with the plastic caps
supplied.
,
Movement of the washer without
the shipping struts in place should
be kept to a minimum. The shipping
struts should be stored on the back
of the washer for future use. They
must be reinstalled before moving
the machine.
Re-fitting the shipping struts
Re-fit the struts by reversing the
installation procedure.
Installation
51