Samsung SMT-i6010 User Manual page 27

After selecting the setup method, press
3
the [Next] soft button. Depending on the
selected setup method, the easy
installation step is changed.
- Select one out of Server/PnP.
- Server: Input Server address, phone id and
select system type
- PnP: If you can use PnP environment, select
PnP.
Enter the network information.
4
When the setup method is [Wired]
- Select one out of DHCP/Static/PPPoE.
- Make sure to contact the system administrator
because network connection may be failed if
incorrect information is entered.
When the setup method is [Wireless]
- When Wi-Fi is selected, nearby APs are
automatically searched.
- Wi-Fi is working properly when the AC adaptor
is connected.
- After selecting an AP to connect in the
searched list, connect to it in the STATIC or
DHCP mode.
[Wireless] function is supported SMT-i6011 only.
SMT-i6010/6011 User Guide _
25