Intended Use; Technical Data - Bosch GST 25 M Original Instructions Manual

OBJ_BUCH-1206-001.book Page 6 Monday, July 5, 2010 9:15 AM
6 | English
Symbol Meaning
GST 25 M: Jigsaw with con-
stant electronic and bow
handle
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings
and all instructions
Before any work on the ma-
chine itself, pull the mains
plug from the socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Sawdust blower device
When sawing metal, apply
coolant/lubricant along-
side the cutting line
Low stroke rate
High stroke rate
Switching On
Switching Off
1 619 P07 698 | (5.7.10)
Symbol Meaning
On/Off switch lock-on
Prohibited action
P Rated power input
1
n No-load stroke rate
0
Cutting capacity, max.
Wood
Aluminium
Metal
Weight according to
EPTA-Procedure 01/2003
/II Symbol for protection class
II (completely insulated)
Delivery Scope
Jigsaw.
Splinter guard, parallel guide, application tools
and other accessories shown or described are
not part of the standard delivery scope.
A complete overview of accessories can be
found in our accessories program.

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts. The saw blade recommendations
are to be observed.

Technical Data

The technical data of the machine are listed in
the Table on page 40.
The values given are valid for a nominal voltage
[U] of 230 V. For different voltages and models
for specific countries, these values can vary.
Please observe the article number on the type
plate of your machine. The trade names of the
individual machines may vary.
Bosch Power Tools